Change Currency: GBPUSDEUR

Change Language: DeutschDanskEnglish (UK)English (US)EspañolFrançaiseעברית (ישראל)DutchTürkçe

Chrome Vega Steering box


This product is currently out of stock

Product Information

Our chrome Vega steering box bolts up to all normal Vega-type brackets and accepts Vega spline U-joints, pitman arms, and accessories.

  • Durable cast iron and machined steel construction
  • Gives years of high-mileage service
  • Faithful reproduction of size, shape and mounting hole locations
  • No core charge


  1. Must use pitman arm 
  2. Recommended for vehicles under 2800 lbs.
  3. The Vega box is the best choice for Model T - 1934 Ford chassis. 1935-48 chassis can use this Vega box


  • Input shaft (for steering u-joint)
    • 5/8-36 spline
  • Output Shaft (for Pitman arm):
    • 1" O.D.
    • 4 master splined shaft
    • Splined area tapers from .997" to .934"
  • Centerline through the output shaft to the front of the box is about 3"
  • Overall length of the box not including the input shaft is 5-3/4"
  • Input shaft extend rearward 1-3/16"
  • From adjust screw to end of output shaft is 8"
  • From outside of box to area on mounting surface is 4-1/2"
  • Box has a swell in the casting that extends past the mounting legs an additional 1/4"
  • Mounting pattern is 2-3/4" and 4-3/8" center to center of the three mounting holes 

Vega steering box is not adjusted at the factory and therefore it is necessary that the steering box be adjusted upon installation. 

Product Code: SA1006C