Dual feed master cylinder with 2 bolt flange style mount. This cylinder is similar to those used on mid-70's Fords (Mustang, Fairlane/LTD, etc. with disc front/drum rear). Will also work with disc/disc rear.
- Uses 3/8"-24 female inverted flare outlets
- Mounting bolt holes are 3/8" or 10mm
- 7 1/4" long without pushrod, add 2" for the pushrod
- 3" wide from the outside of the reservoir to the edge of the outlets
- mounting flange is 4" wide
- Master Cylinder is also 3-7/16" tall without the cap
- Push rod is threaded 3/8"-24 (fine thread).
Specs:
Centerline of Holes: 3.25
Material Type: Steel
Overall Height: 5.00
Overall width: 4.00
Mounted length: 7.00
Bore size: 1"
Feed: Dual
Outlet Fitting: 3/8"-24IFF
Tech Tip: The bigger the master cylinder is, the more fluid you get, but you'll have less pressure at the caliper.
Warning: There is no longer a loop on the end of the push rod for this master cylinder. It is now threaded 3/8"-24 (fine) male.
Product Code: SB7101
